Plate-Loaded Lat Pulldown & Low Row (4000/5000 Series)

The Lat and Low Row Attachment adds 3” to the height of power racks.  

The Lat and Low Row Attachment adds 27” of depth to power racks. We suggest leaving an additional 10” of clearance behind the attachment so there is space to load plates onto the carriage.  

No, the 4000 Rear Base Stabilizer does not fit the 5000 series power rack. Vice versa, the 5000 Rear Base Stabilizer does not fit the 4000 series power rack.  

Yes, you will just need to purchase the Lat and Low Row Spacers, as well. These spacers do require the Logo Plate Crossmember and Rear Base Stabilizer for compatibility.  

Yes. If you order an 80” rack, the 93” Lat and Low Row Attachment will not be compatible. Vice versa, if you order a 93” rack, the 80” Lat and Low Row Attachment will not be compatible. 

Yes! This is not optional. The uniquely shaped Rear Base Stabilizer serves as an anchor point for the pulley system and foot plate. 

An 80" rack has approximately 52.1" of cable travel and a 93" rack has approximately 66.9" of cable travel. If the cables are pulled too far, then the trolley will hit the top pulley, and may cause damage. 

No. The Plate-Loaded Lat Pulldown & Low Row (4000/5000 Series) is NOT a stand-alone product. It will need to be installed onto a compatible REP Rack (PR-4000 Power Rack and PR-5000 Power Rack) as it will not stand on its own.